Elite Software
Elite Software Newsletter
July 21st, 2021

In this Issue

Elite Software offers over 30 programs for all kinds of mechanical, electrical, and plumbing design applications. This monthly newsletter will announce new software, trade show events, and tips on using existing software. See previous newsletters here.

NFPA 13 is the industry standard on all matters related to fire sprinkler systems in the USA, and the first version was published over a century ago, in 1896. You can read an overview about NFPA 13 here.

Fire protection system design is primarily concerned with creating a pipe network that will supply sufficient water flow over a given hazard area using water delivered by sprinkler heads and hose stream flows. Matching the available water pressure with an optimal pipe and sprinkler head arrangement is the critical component in meeting the flow requirements. Hydraulic water flow calculations are needed to verify this goal.

Sometimes a fire pump is needed to assist the city water pressure in order to obtain the necessary pressure and flow conditions. The Elite Software Fire program performs all necessary hydraulic calculations in accordance with NFPA 13 and for fire protection systems both with and without pump assistance. See more details on Fire here.

NFPA 20 is the Standard for the Installation of Stationary Pumps for Fire Protection and can be obtained from here. See the article here to learn how to size a fire pump, understand the differences between various types of fire pumps, and design the piping surrounding the fire pump.

Adding and sizing a fire pump for use in the Elite Software Fire program requires following some guidelines as explained in the new Fire Pump video. There is also a Fire Basics video and a Fire Standpipe video to help you learn how to use the software. These videos are available on Elite's web site and also on the new Elite Software YouTube channel.

If you have any questions, please feel free to call 800-648-9523 or 979-690-9420, or send email to info@elitesoft.com.


Bill Smith
President, Elite Software


Fire Basics Video

Fire Pump Video

back to top

Fire - Fire Sprinkler System Design

The Fire Program quickly performs all necessary hydraulic calculations as required by the National Fire Protection Association (NFPA 13). Along with calculating hydraulic flows and pressures, Fire calculates optimal pipe sizes and performs a "peaking analysis" of multiple coverage areas to determine which area is the worst case. Fire can handle all types of sprinkler systems (trees, grids, loops, and hybrids), with up to 1,000 sprinklers and pipes. Pumps, meters, backflow preventers, alarm check valves and standpipes can also be analyzed.

Fire can work in both English and metric SI units. Fire calculates the water flow (GPM or LPM, depending on the units selected) and velocity through all pipe sections, the flow and residual pressure at each sprinkler head, the pressure losses incurred in each pipe section due to both friction and elevation changes, the maximum system demand pressure, and the total water flow demanded by the system. A supply/demand graph (see example below) is also provided to show that the system water demand is within the capacity of the available water supply. The report format is designed to aid both the designer and the plan reviewer. See some sample input screens below, and see some sample reports here.

Fire is affordably priced from $499 to $1250, depending upon the node capacity. See more details and download a trial copy of Fire from the Fire program webpage.

back to top

Copyright @ 2021 Elite Software Development, Inc.
Elite Software Development, Inc. | 2700 Arrington Road | College Station | TX | 77845

Unsubscribe instantly from these emails by clicking here.